All central air conditioning units create some condensation, but it becomes an issue when water is physically dripping into your house, which is why you need to contact an aircon leaking service. It may take some inquiry to determine the origin of your indoor AC unit’s water leak, but one of four issues is usually at blame:
- Blocked drainpipe
- A drain pan with cracks
- An obstructed air filter
- Leak of refrigerant
If your AC system is leaking water, be cautious to stop reading about these problems before continuing. This can stop the leakage from worsening.
Blocked drain pipes:
Your air conditioner eliminates water vapor from the air in your house as it cools the space. This moisture flows into a drain pan and condenses on the evaporator coils of your interior air conditioning unit. The condensate drain line is the conduit via which the condensation exits your house from there.
This drain pipe on air conditioners can become blocked with dust, mildew, fungus, or other material if they aren’t properly serviced. Substantial obstructions may result in a leak in the pipe or obstruct the condensation’s departure. The only place the water can go at that moment is over the edges of the drain pan.
A drain pan with cracks:
Water leaks might originate from the drain pan itself. The drain pan of an ancient air conditioner is generally also old. Condensation may seep out of the pan as a result of corrosion, which can lead to holes and fractures appearing in the rust over time.
An obstructed air filter:
A sufficient quantity of airflow cannot reach your air conditioning system when the filter on your air conditioner is very dusty. On your extremely cold evaporator coil, this lack of warm airflow may lead to the formation of ice. The water that drops down from the ice when it melts may be more than your drain pan can handle, causing overflowing over the edges – so get the aircon service and repair today.
A spill of refrigerant:
Evaporator coils might freeze due to refrigerant leaks as well. The evaporator coil freezes over when the refrigerant level in your air conditioner is too low because it decreases system pressure across the whole unit. Ignoring ice buildup on your evaporator coil is never a smart idea. It’s an indication that your air conditioning system is working harder than it needs to and that the compressor and other costly parts are being subjected to excessive strain.
How can a multi-story house be evenly cooled?
It might be wonderful to move from a modest, one-story house to a bigger, two- or three-story house—until you get your first summer power bill, that is.
As you have surely observed, cooling a large, multi-story home may be costly. Furthermore, despite your best efforts, certain sections inevitably wind up being hotter than others.
Have your east- and west-facing windows tinted:
Right now, it’s quite likely that your windows are significantly increasing your energy bills. The Department of Energy estimates that 76% of the sunshine that enters your home through typical double-pane windows converts to heat during the cooling seasons.
By having your windows properly tinted with security films, you may reduce this heat gain. To maximize the benefits, experts advise applying this film to windows that face east and west.
Add heavy-duty shades or plantation shutters:
If your windows face south, east, or west, adding plantation shutters, strong blinds, or cellular shades will provide you more control over the temperature in those rooms.
These window coverings still let in some indirect light so you aren’t walking about in the dark, but they also keep out direct sunshine, which raises the temperature in your house. Also, they’ll keep your house warmer in the winter.
LEDs should be used instead of incandescent bulbs:
Holding your hand close to a lighted bulb will allow you to feel how hot incandescent lights are since they emit a lot of energy as heat. People often refer to LED bulbs as “running cooler” since they produce light at a far lower temperature than incandescent and even CFL bulbs.
By switching to LEDs from incandescent bulbs, you’ll reduce the amount of heat in your house and benefit from lights that last longer and are less expensive to operate.
Putting in a zone system:
The fact that the upstairs is constantly warmer than the downstairs is one of the main issues with cooling a multi-story property. When heated air rises, this occurs.
The ideal approach is to incorporate a zone system into your HVAC system since the dampers direct airflow where it is needed.
A zoning system offers you two important advantages. The first is that the temperature in your entire house will finally be pleasant. The second benefit is that you will save money by not cooling portions of your house that are unnecessary.